Conveyors are material handling systems that allow for easy transporting of products, from powder to bulk to complicated geometries. They are integral to all kinds of systems, as they provide a fast and safe method of handling large volumes of materials. There are many kinds of conveyors, but their working principle remains constant across each type; move objects via gravity or by mechanical power from one destination to the next by using a frame that holds belts, buckets, rollers, or other moving components.
http://www.wxhq-group.com/roller-conveyor/

Sweater knitting machine also referred to as flat bed or v-bed knitting machine. That have two rib gated, diagonally-approaching needle beds, set at between 90 and 104 degrees to each other and are positioned so
that the upper ends form an inverted "V". Sweater knitting machine has two needle beds arranged in an inverted v-shape.
http://www.tckjknittingmachine.....com/sweater-knittin

For instance, many renewable energy sources (such as wind, solar energy or solar energy, tides) are intermittent. Sometimes the use of renewable energy is not direct when the energy is available, but at other times. Then we need energy storage so that energy can be used when needed.
http://www.suntrver.com/reside....ntial-energy-storage

Metal honeycomb substrates used in catalytic converters are made from extremely thin metal foil, typically with a thickness of just 0.05mm. By comparison the walls of a ceramic substrate may be four times thicker. For this reason, metal substrates offer less resistance to gas flow and therefore can accommodate a given flow rate with a lower pressure drop than an equivalent ceramic substrate. The improved flow properties of a metal substrate mean that, for a given level of pressure drop, a metal substrate can be made with a greater cell density than the ceramic alternative.
http://www.sheungwell.com/auto....-exhaust-purificatio

The durability of the bearing is determined by the load and required speed. Furthermore, rails can generally be any profile – simple flat surfaces, round polished rods, or complex profiles with polished ground surfaces on which balls or cylindrical rollers can ride. Hard (Rockwell 6 and ground bearing surfaces work best.

http://www.lsyongrun.com/linear-bearing/