car radiator cap


G class carbide toughness is good, can use larger rake Angle, the blade is sharpened up to some, the cutting is light

.

G class carbide toughness is good, can use larger rake Angle, the blade is sharpened up to some, the cutting is light, and the chip and tool is not easy to produce adhesive, is suitable for processing of stainless steel. Especially in rough turning and intermittent vibration cutting, YG class alloy the advantage is more important. In addition, YG kind of alloy has good thermal conductivity, the thermal conductivity is higher than HSS nearly twice as much, is twice as tall as YT kind of alloy. So YG class alloy used in cutting of stainless steel is more, especially in roughing tool, cutting knife, reaming drill, reamer is more widely applied in manufacturing, etc.
A long time, generally USES the YG6 and YG8, YG8N, YW1, YW2 ordinary brand of cemented carbide as a cutting tool material stainless steel, but cannot obtain the ideal effect; Adopting new brands of cemented carbide, such as 813, 758, 767, 640, 712, 798, YM051, YM052, YM10, YS2T, YD15 etc, cutting stainless steel can obtain good effect. And 813 brand carbide cutting tools for cutting car radiator cap austenitic stainless steel effect is very good, because 813 alloy has the high hardness (HRA91 or higher), intensity (b = 1570 mpa), but also has good high temperature toughness, oxidation resistance and bonding resistance, its organization dense wearability.
High speed steel is mainly used to manufacture milling cutter, drill, tap, broach and other complex multitool. Common high speed steel W18Cr4V when using low tool life already does not meet the need, USES the new type of high speed steel cutter cutting stainless steel can obtain good effect.Cutting conditions, with 95 W18Cr4V and W18Cr4V two kinds of material of tool 1 cr17ni2 workpieces, tool sharpening a processing number 2 ~ 3 and 12 parts, respectively, with 95 W18Cr4V tool life improved several times. This is due to increased carbon content of steel, thus increasing the carbon content in steel, room temperature hardness increase 2 HRC red hardness is better, up 600 ℃ by W18Cr4V HRC48.5 HRC51 ~ 52, 2 ~ 3 times higher than that of W18Cr4V abrasion resistance.
Application of high vanadium high speed steel W12Cr4V4Mo production type face milling cutter processing 1 cr17ni2 can obtain high tool life. Because of vanadium content increase, VC can be formed in the steel hardness is very deep draw stamping high, small VC exist for interface, can prevent grain growth, improve the wear resistance of steel; W12Cr4V4Mo a good red hardness, hardness can reach HRC51.7 when 600 ℃, thus is suitable for making all sorts of complex of cutting stainless steel cutting tools. But its strength and impact toughness is slightly lower than W18Cr4V, when used to pay attention. With the continuous development of production technology for large batch of artifacts, the carbide blade, complex cutter for machining the effect will be better.
With the progress of society and the development of manufacturing technology, stainless steel precision parts is more and more widely applied in the field of industrial and household utensils, big to aerospace, trail POTS and pans... Stainless steel parts is everywhere. The wide application of stainless steel precision parts for stainless steel parts processing higher metal stamping parts and higher demands are proposed. There is a need for stainless steel parts processing industry practitioners pay attention to the choice of cutting tool materials, in order to improve the precision parts of stainless steel machining quality and efficiency.

973 Views

Comments